GS1008

Present Location:  Injection machine

  • Name: GS1008
    Category: Injection machine

    Detail

    The hydraulic standard solution "GS Variable pump Series" focuses on the mass market and is the most popular injection molding machine series in China and other countries throughout the world. The robust machine concept is fitted with high quality components and offers reliability and overall production consistency

    Cost-effective: Best price/-performance ratio

    Reliable: European components for electronics, hydraulics, electrics and drive

    Userfriendly: Latest control technology

    Modular: Up to three injection units for each clamping force and different screw sizes available


    Clamping unit

    • Proven 5-point double toggle
    • Free programmable core pullers with 1 to 6 circuits
    • Euromap (Spain) standard layout
    • New developed integrated safety bar
    • Automatic mold height adjustment
    • Optimized machine guarding design for fast and easy mold changing

    Injection unit

    • Up to three injection units per clamping force
    • Free selection of variable screws depending on application
    • Accumulator for increased injection performance (optional)

    Hydraulic

    • Sound-reduced and energy saving hydraulic pump
    • High-quality components for electronics, hydraulics, electrics and drive

    The injection machine with variable pump controlling system is one of the energy saving series in our company. This series adopt high-speed response proportional variable system, which can make the power output of hydraulic system match with the actual consumption of the load and avoid the loss of energy. Compared to the machine with fixed pump control system, 30%-50% electricity energy can be saved, it shows obvious economic benefits. 
          
    In addition, the heat from the machine running is very low, it can reduce at least 30% cooling water consumption, which extends the service life of airproof seals and reduce the use and maintenance cost of machine greatly. This series with variable pump controlling system brings obvious economic benefits to wide customers relying on its excellent performance
    .

        
    The following shows its main excellent performance:
    ◆ The variable pump series can save electrical energy from 30% to 50% comparing with fixed pump series.  While servo motor control system series can save energy by 40% up to 75%.
    ◆ Quick response of system, shorten the cycling time
    ◆ Very low oil temperature of this system prolongs the service life of machine 
    ◆ Equipped with high-pressure mold protection function and it can reduce the mold opening/closing impact, thus extends the service life of machine and mold
    ◆ Lower maintenance cost

    Technical parameters

    Description
    Unit
    GS1008
    A
    B
    C
    D
    Injection unit
    Screw Diameter
    Mm
    100
    110
    120
    130
    Screw L/D ratio
    L/D
    24.2
    22
    20.2
    18.6
    Theoretical shot size
    Cm3
    4359
    5274.3
    6276.9
    7366.6
    Injection weight (PS)
    g
    3967
    4800
    5712
    6704
    Injection pressure
    Mpa
    220
    182
    153
    130
    Injection rate (PS)
    g/s
    688
    833
    991
    1163
    Plasticizing capacity (PS)
    g/s
    86.5
    104
    122
    139
    Max screw speed
    Rpm
    0-95
    Injection stroke
    Mm
    555
    Clamping unit
    Clamp tonnage
    KN
    10080
    Toggle stroke
    Mm
    1220
    Tie bar space (H*V)
    Mm
    1160*1160
    Max. mold height
    Mm
    1160
    Min. mold height
    Mm
    500
    Daylight opening
    Mm
    2380
    Ejector stroke
    Mm
    320
    Ejector tonnage
    KN
    215
    Ejector number
    Pcs
    21
    Others
    System pressure
    Mpa
    16
    Pump motor power
    Kw
    37+55
    Heater power
    Kw
    74.35
    Dimension (L*W*H)
    M
    11.87*2.72*2.78
    Net weight
    T
    51
    Hopper capacity
    Kg
    100
    Oil tank capacity
    L
    1100

    Back